Service
Assembly
Controlled, fast on-site assembly with mechanical, bolted connections; the place and order of every part is set at the design stage.

Assembly follows the order planned at the design stage. Parts arrive on site marked; columns are set on the anchors in the foundation, beams and trusses are joined with bolted connections, and then the purlins, roof and façade system are installed.
Using bolted rather than welded connections on site speeds up assembly, makes it less dependent on the weather and makes every connection easier to inspect. Because the parts are planned as a whole from the design stage, the process on site is predictable.
Before and during assembly
- Checking foundation and anchor dimensions
- Erection sequence and lifting plan
- Tightening and checking bolted connections
- Health and safety measures and site organisation
The bolted system has another advantage: when needed, the building can be extended, altered or converted for new needs.
How we work
-
1
Foundation check
Anchor and foundation dimensions are checked against the drawings.
-
2
Columns
Columns are set on the anchors and plumbed.
-
3
Beams and trusses
Beams and trusses are joined with bolted connections.
-
4
Roof and façade
Purlins, roofing and cladding are installed.
-
5
Final checks
Connections and dimensions are checked and the building is readied for handover.
Frequently asked questions
All questionsHow long does assembly take?
It depends on the size of the building, site conditions and the roof and façade system. Because parts arrive ready and numbered, steel erection usually takes far less time than building in cast-in-place concrete; we set the exact duration together in the project plan.
Can assembly be done in winter?
Bolted connections are far less affected by the weather than site welding and concrete work. Lifting is postponed in conditions that affect safety, such as strong wind.
Other services
-

Architectural design
We listen to your needs and design the building in 3D, making architectural decisions together with the requirements of the steel system…
-

Engineering and structural design
We design the structural system to current regulations and resolve connection details and building services early in the design.
-

Steel fabrication
Structural parts are made ready for assembly in our three workshops: welding stays in the workshop, and parts reach the site ready to be…
-

Turnkey delivery
We run design, engineering, fabrication and assembly under one roof, with every stage from foundation to roof planned in advance.
Planning something similar?
Tell us what you want to build; you can attach drawings or photos. We will get back to you as soon as possible.

